440V protector -(erstwhile known as OVCD)

Only protection device for protection against neutral open and double phasing protection

Most of the equipments today are having power supply which can handle fluctuations between 170V to 270V.  Also a lot of equipments have built in over voltage protection. 

However there are accidental cases where trees fall on over head wires or accidentally neutral opens  and resulting fault causes voltage in single phase to shoot upto 440V. The in built over voltage protection of  any equipment is of no use , because they get damaged themselves. 440V protector is protection device for protection against such problems of  neutral open or double phasing.

If you look at the pictures above you can see a typical distribution line problem. There is chance of wire sagging and over head wires touching each other . this can easily cause double phasing condition.

440V protector cuts off the supply to equipment whenever there is such a problem and connects the supply only when the voltage comes back to normal.

It effortlessly withstands voltage fluctuations up to 440 Volts and spikes up to 6000 Volts. It is programmed with a power-on delay of 3 seconds (configurable) for initial surges which are harmful to any other device.

Why should you consider using 440V protector before your equipment?

1.protection from neutral open or double phasing

2.Zero downtime

3.Your equipment becomes more rugged

4.Less service calls = Increased profitability + Increased credibility.

5.Better perception of quality of your system in the minds of the customers

6.Increases the chances of repeat sales or referral sales.

USP:

Now you can install your equipment in the worst electrical conditions without being bothered about service calls.

Cost to company if your product breaks down.

Man power cost	Rs 800	Travelling and per day cost of service       person
Production down time	Rs 1000	Could cost upward depending on the type of machine
Part replacement	Rs 500	Could cost upward
Equipment decay	Yes	Reduction of life of equipment
Goodwill lost	Yes	Incalculable
Customer’s loss	Yes	Significant
Disturbing to business focus	Yes	Significant( both to customers and vendor)
Replacement of product	Product cost	Capital Loss

All figures in Indian rupees

Costs projected are indicative and may vary for product and services

Features

•Neutral open protection (Protection up to 440 volts)

•Withstands up to 6000V spikes

•Smart start

•Under/over voltage protection

•No wave form distortion

•Lightweight , transformer-less design

•Compact size.

 

 

 

How it works.

 

440V protector is connected at before the equipment in use.

Incoming current will first pass through 440V protector then into the equipment. 440V protector continuously monitors the line voltage.

Whenever the voltage is above or below the set voltage limits the 440V protector simply cuts the voltage to the equipment thereby saving it from the line disturbance. It reacts within fraction of second to the disturbance. 440V protector will withstand the voltage even as high as 440 Volts. It however does not stabilize the voltage as in the case of other devices in the same category like Stabilizer, CVTs.

When the voltage returns to normal , the 440V protector resumes the supply to the equipment with short power-on delay of 3 seconds(configurable). This feature is called the Smart Start. It prevents the initial harmful transient that may damage the Equipment.

How is 440V protector better than other power conditioning / protection products?

1.Superior protection

2.Occupies less space

3.Lightweight

4.Transformer less design

5.Portable.

Feature comparison with other devices in the same category

FEATURES	440V protector	Servos	Stabilizer	CVT	Spike buster
Protection up to 440V	Yes	No	No	No	No
Under voltage / Over voltage protection	Yes	No	No	No	No
Protection from spikes	Yes	No	No	Yes	Yes
Protection from over load	Yes	No	No	Yes	No
Line indication	Yes	No	No	No	Yes
EMI /RFI filters	Yes	No	No	No	No
Waveform distortion	No	No	No	Yes	No
IC technology	Yes	No	No	Yes	No

 

End Use applications

 

UPS	AC drives	Medical Equipments
Solar power plants	Compressors	CCTV system
Refrigeration equipments	Control Panels	Dish Satellite System

 

 

Please fill up the form for any enquiries related to 440V protector

 

Name(required)

Email(required)

contact no(required)

query

Contact Us

Δ