MSS

Home » Posts tagged 'equipment for power fluctuation'

Tag Archives: equipment for power fluctuation

Uttarakhand – 63A 3ph Equipower Lite installed for Home through a dealer for neutral open issue


This is a home voltage protector installed in uttarakhand for customer who has faced neutral open problem in his home. Prior to installation some of his equipment got damaged due to neutral open issue.

Equipower will protect against neutral open, double phasing, double voltage , 440V in any individual phase for more than 24 hours. It is designed for this purpose specifically.

#Equipower™ is a voltage protector which is connect in your main line and it protects all equipments connected through it. It can easily protect your equipment from voltage as high as 440V in single phase and that is what makes it special
It also  acts as an insurance against power fluctuation that could damage your electrical appliances and electronic devices used in your homes and offices .

#Equipower™ protects your electrical appliances and electronic devices against high voltage, low voltage, surges, spikes.  However what sets it apart from other protection devices is the ability to protect your equipment in case of #neutralopen and #doublephasing problems.  

Most of Equipments deteriorate very quickly after the warranty period. #Equipower™ increases life of equipments and minimizes the risk of damage.

for queries, you contact us on 9769996205 or fill the form below

63A 3ph Equipower Lite installed for Home in Nagpur


This is a home voltage protector installed in Nagpur for customer who has faced voltage problem in his home. Prior to installation some of his equipment got damaged due to voltage problems.


Equipower will protect against neutral open, double phasing, double voltage , 440V in any individual phase for more than 24 hours. It is designed for this purpose specifically.

#Equipower™ is a voltage protector which is connect in your main line and it protects all equipments connected through it. It can easily protect your equipment from voltage as high as 440V in single phase and that is what makes it special
It also  acts as an insurance against power fluctuation that could damage your electrical appliances and electronic devices used in your homes and offices .

#Equipower™ protects your electrical appliances and electronic devices against high voltage, low voltage, surges, spikes.  However what sets it apart from other protection devices is the ability to protect your equipment in case of #neutralopen and #doublephasing problems.  

Most of Equipments deteriorate very quickly after the warranty period. #Equipower™ increases life of equipments and minimizes the risk of damage.

for queries, you contact us on 9769996205 or fill the form below

63A 3ph Equipower Lite installed for Home in Kolkata


This is one customer who bought the item online from our online store https://msspowersys.myinstamojo.com/


Equipower will protect against neutral open, double phasing, double voltage , 440V in any individual phase for indefinite period of time. It is designed for this purpose specifically.

#Equipower™ is a voltage protector which is connect in your main line and it protects all equipments connected through it. It can easily protect your equipment from voltage as high as 440V in single phase and that is what makes it special
It also  acts as an insurance against power fluctuation that could damage your electrical appliances and electronic devices used in your homes and offices .

#Equipower™ protects your electrical appliances and electronic devices against high voltage, low voltage, surges, spikes.  However what sets it apart from other protection devices is the ability to protect your equipment in case of #neutralopen and #doublephasing problems.  

Most of Equipments deteriorate very quickly after the warranty period. #Equipower™ increases life of equipments and minimizes the risk of damage.

for queries, you contact us on 9769996205 or fill the form below

40A 1ph Equipower Lite installed for small office in Borivali, Mumbai


Our customer complained of Computer motherboards getting damaged very often and wanted something to protect their complete office.
Equipower will protect against neutral open, double phasing, double voltage , 440V in any individual phase for indefinite period of time. It is designed for this purpose specifically.

#Equipower™ is a voltage protector which is connect in your main line and it protects all equipments connected through it. It can easily protect your equipment from voltage as high as 440V in single phase and that is what makes it special
It also  acts as an insurance against power fluctuation that could damage your electrical appliances and electronic devices used in your homes and offices .

#Equipower™ protects your electrical appliances and electronic devices against high voltage, low voltage, surges, spikes.  However what sets it apart from other protection devices is the ability to protect your equipment in case of #neutralopen and #doublephasing problems.  

Most of Equipments deteriorate very quickly after the warranty period. #Equipower™ increases life of equipments and minimizes the risk of damage.

MSS Equipower installed at Gatsby pub, Bengaluru for 3 ph in – 1 ph out online UPS by Delta


We installed 32A and 16A Equipower lite at #Gatsby Pub, Bengaluru through one of our partners, #Cyneric system. ( for enquiries in Bengaluru you can call 9845279944)

The system is connected to 3phase in – 1 phase out online UPS system, for protection of Delta online UPS.

Equipower will protect the UPS from over voltage and it will absorb and bypass spikes upto 6000V.

If you have queries related to #Equipower you can whatsapp us on 9769996205 or write to us below

Why should you install a home voltage protector?


Would you live in a house with No MCB ? Would you feel safe to live in that house?

Whenever a building is designed, all safety factors are taken into consideration. From electrical installation point of view , the safety factors to be considered are

  1. Over current
  2. Spikes
  3. Over voltage

All of them have to considered from worst case scenario basis, if not then it can cause fires and loss of property, worse.. loss of life.

Generally short circuit is taken care with help of MCBs/ fuse. While MCB/fuse can handle overload issues , short circuit, which is the worst case scenario is also taken care

Lightning protection

Lightning protection is generally taken care in high rise building , but the measure taken are incomplete and only from structural integrity point of view as lightning strike on a building will result in structural damage. Lightning rod is installed on top of building and connected to an earthing pit so that lightning pulse can be directed to the ground with out causing damage to building

As the lightning strikes the rod and passes to ground the wire carrying the lightning pulse to ground with gets magnetized. If there is any utility wire which is in the magnetic field of wire carrying lightning pulse, the charge can transferred to the utility cable, this is how normally electronic equipment get damaged due to lightning.

Spike protection

Every on off action of any electrical or electronic device will create a spike. This is how spike is generated inside your house. Dont believe us? Do a small experiment.

  1. Go to your bath room and switch on the light bulb and now switch on the geyser
  2. you will notice that the light from the bulb flickers or goes dim.
  3. now switch off the geyser , you will see that light goes bright again.
  4. Congratulation!!! You have created voltage fluctuation in your house!!!

The geyser is generally 3000-4000 Watts and it causes voltage fluctuation during its on -off operation. Now imagine the same for other equipment in your home. viz. TV, refrigerator, AC.

So the bottomline is that the spikes are always there in your house. Its not a question of if but when it will damage your electronic items.

Do you have any safeguards against spikes in your home? now that you know that spike are also always there, does it not scare you?

Over voltage protection

The MCBs and fuses are current sensing protection. In a Fuse when the current increases, wire melts in fuse to disconnect the circuit. In an MCB there is bimetallic strip inside it bends due to heat causing it MCB to release contact and make it trip.

If the voltage changes from 230V to 280-290 V, it has not effect on the current and as a result the MCB/ fuse do not react. Your equipment can get damaged by high voltage and MCB / fuse will not react

This brings us back to question ” Are you really protected in your home from electrical problems?”

This is the reason why you should install a home voltage protector.

For more details you can get in touch with me on

9769996205 ( whatsapp no.)

email: asm@microsystemservices.com

Some Facts about overvoltage


Over voltage problems are the most frequent the most overlooked and neglected. Many times equipment failure, downtime, software and data corruption, are the result of a problematic supply of power.  There is also a common problem with describing power problems in a standard way. We have tried to list out some of the common facts about over voltage issues

  1. Overvoltage, and its destructive effects, are well known but are often not recognized or understood.
  2. Little is documented in terms of its magnitude and frequency.
  3. It is difficult to identify, due to its sporadic nature, and often comes and goes undetected.
  4. Because of all the above, its existence is sometimes denied.
  5. Equipment failures due to overvoltage are often misperceived as defective equipment.
  6.  Power companies do not deny its existence; but they do not publish or otherwise inform the users that it exists, or warn users of potential periods in which it may occur.
  7. Power fluctuations are also caused due to in–line equipment. Viz. Motor during its starting period draws heavy current due to which voltage drops causing imbalance and over voltage somewhere else.
  8. With very few exceptions, electrical power distribution systems are inadequate to provide voltage within acceptable limits to all users at all times.
  9. Power companies cannot prevent overvoltage because they can only react to its existence, usually in response to customer (user) complaints about failing appliances, etc.
  10. The time of response can vary widely (anywhere between one minute and weeks) depending on many variables in the distribution system.
  11. Overvoltage can occur at any time, due to many factors, but is most likely to occur during certain periods such as fast changing high load demands, as seen during severe cold weather periods.
  12. Power companies are mandated by law to provide service without overvoltage.
  13. Power companies are not held accountable by any regulation authority for overvoltage.
  14.  Power companies will sometimes reimburse damage costs due to overvoltage if proof is provided by the complainant.
  15.  Overvoltage can only be proved by the use of a voltage recorder.
  16.  Some power companies offer overvoltage insurance to users.
  17.  Over voltage events are misperceived to be equipment failures leading to their replacement with other brands that do not have overvoltage protection and essentially mask the effects of overvoltage which can lead to inevitable catastrophic failures.

Also see:

  1.  OVCD- Over Voltage Cut-off Device
  2. How does a Servo Controlled Voltage Stabilizer work?
  3. Product breakdown management
  4. Protect your Equipment from harmful power fluctuations..
  5. Give reliability to your UPS systems in high fluctuation areas. OVCD solves your servicing woes!!!
  6. Protect your electronics

Visit our website: www.microsystemservices.com

Our email us for more info at micross@microsystemservices.com

References:

  1. http://www.hvacovervoltage.com/info/Overvoltage_Wake_up_Call.pdf
  2.  http://www.hvacovervoltage.com/info/PowerProblems.pdf
%d bloggers like this: